Atomstack M100 130W Double Compressed Spot Laser Module

The Strongest Cutting Capacity & Increases Cutting Efficiency

Higher laser power, faster engraving speed! NEW ATOMSTACK M100 20W four Ultrafine Compression Spot Laser Module: Can be used for laser cutting machine, laser engraving machine, CNC, DIY laser. Upgrade high-quality fixed-focus laser, no need to focus. The engraving speed is 200% higher than other 10W lasers.

Purchase Instructions:

1. The M100 laser module can be installed on any engraving machine model of Atomstack 5W series and 10W series (A10Pro/S10Pro/X7Pro), just use the corresponding adapter board, and it can be used without any additional settings.

2. Comes with a set of Atomstack air assist kits, which can greatly optimize your artistic creation and work. It can not only improve work efficiency but also achieve flawless cutting. It is the best partner for your laser.

3. If you own other brands of engravers, such as Ortur, NEJE, Two-Trees, etc., you can also install our Atomstack M100 laser module, which comes with a free adapter in the box.

Features:

1. It can be used for laser cutting machines, laser engraving machines, CNC, and DIY laser.

2. Laser protective cover: The laser is equipped with a protective cover to protect the eyes of the user without the need to wear additional protective glasses. At the same time prevent pets from grabbing the laser spot.  

3. Made of aluminum, strong and durable.

4. Upgraded high-quality fixed-focus laser, no need to focus.

5. Aviation aluminum TTL driver board with cooling fan can ensure continuous long-time work.

6. Engravable materials: wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective electroplating layer, and lacquered metal, after blackening  Utility knife.     

7. Cuttable material: cardboard, non-woven fabric, veneer, acrylic, and some thin plastic board.

8. 0.08*0.1mm Four compression spot light coupling technology makes engraving more powerful and precise.

9. Engraving speed is 200% higher than other 10W lasers.

10. High energy can cut 8.5mm thickness plates at one time.

11. The laser sintering temperature is 2400 degrees, and the effect of engraving metal is better.

12. The laser has a built-in horizontal gyroscope anti-tip protection device, and it stops working when the tilt angle is 20°.

13. The wind-collecting hood can clean the smoke and dust to protect the lens to avoid laser energy attenuation.

14. The transfer circuit board is compatible with 95% of laser engraving machines on the market， Including Atomstack, ortur, Neje, twotree, etc.

Product Details:

Specification: 

Air assist kits Specification:

What is in the box?

Cautions:

1. The laser light emitted by the laser module is likely to injure a person's eye, so do not directly gaze at its end surface and wear appropriate safety glasses to prevent laser light when it is working.

2. Laser module needs an appropriate laser driver(PCB). When the laser module connects with the power supply, please set the output voltage to zero.  The adjustment of the current should be slowly increased or decreased to avoid damaging the device.

3. Keep the device working or stored in a dry environment. The anti-dust grade is over one million, in order to prevent dust inside the lens to affect the laser dot shape.

4. Working at high temperatures will increase the threshold current, reduce conversion efficiency, and speed up the aging of the device.

5. When the output power is higher than a specific parameter of operation, it will accelerate the aging of the device.

6. When the operating temperature of the laser diode is over 70degree, please do well heat dissipation of it.

7. This laser module is an electrostatic-sensitive device. Please make sure to ground yourself or wear an antistatic wrist strap before you take it.